该闸为建筑在某平原河道上的一节制闸，主要是用来灌溉、防洪、排涝等。排放

The gate is a section gate built on a plain river channel, mainly used for irrigation, flood control and drainage. The discharge water is discharged downstream through the gate, so the gate design must meet the above requirements. First, the dimensions of the gate hole, gate, gate floor and other infrastructure are designed. The gate width is 8.0m and the height is 6.7m. The total clear width of the gate chamber is 45.6m. Stabilize the above buildings to meet the requirements of relevant regulations. If it is not satisfied, then modify it, check until it is satisfied. The main facilities of the project include gate, gate floor, energy dissipation facilities, gate pier, working bridge, traffic bridge and retaining wall. Reinforcement calculation is performed on the bottom plate of the gate, and a single-hole one-link is selected as the research object, and the elastic foundation beam method is used for design calculation to obtain the required reinforcement area. Finally, design the retaining wall.

The gate is a control gate built on a plain river channel, mainly used for irrigation, flood control, drainage and so on. The amount of water discharged through the gate is discharged downstream, so the design of the gate must meet the above requirements. First of all, the design of gate holes, gates, gate floor and other infrastructure dimensions, gate width of 8.0m, height of 6.7m gate room total net width of 45.6m. A stable examination of the above buildings shall enable them to meet the requirements of the relevant provisions. If no further modifications are met, the core is made until it is satisfied. The main facilities of the project are gate, gate floor, energy reduction facilities, gates, work bridges, traffic bridges and retaining walls. Then the base plate of the gate is calculated, a single hole is selected as the research object, and the design calculation is carried out by the elastic foundation beam method, so that the required rib area is calculated. Finally, the retaining wall design is carried out.

The sluice is a sluice built on a plain river, which is mainly used for irrigation, flood control and drainage. The discharge water is discharged to the downstream through the gate, so the gate design must meet the above requirements. Firstly, the size of the gate opening, gate, gate base plate and other infrastructure is designed. The gate width is 8.0m, and the height is 6.7m. The total net width of the gate chamber is 45.6m. Check the stability of the above buildings to make them meet the requirements of relevant regulations. If it does not meet the requirements, it shall be modified until it meets the requirements. The main facilities of the project include gate, gate base plate, energy dissipation facilities, gate pier, working bridge, traffic bridge and retaining wall, etc. Then, the reinforcement calculation of the sluice floor is carried out, the single hole and one joint are selected as the research object, and the elastic foundation beam method is used for the design calculation, and the required reinforcement area is calculated. Finally, the design of retaining wall is carried out.<br>