Material – All basement pipe inlets shall be of cast iron, steel, brass, or bronze with lids of cast brass or bronze and shall consist of a sleeve not less than 200 millimeters in diameter through the floor extending to and flush with the ceiling below and with a top flange, recessed with an inside shoulder, to receive the lid and flush with the finished floor surface. The lid shall be a solid casting and shall have a ring lift recessed on the top thereof, so as to be flushed. The lid shall have the words “FOR FIRE DEPARTMENT ONLY, DO NOT COVER UP” cast on the top thereof. The lid shall be installed in such a manner as to permit its removal readily from the inlet.