王总：您好！     我司过滤器清洗装置目前一直存在如下问题：1、超声

Wang: Hello! <br>     Our filter cleaning device currently has the following problems: <br>1, ultrasonic cleaning has been unable to achieve the expected results, are always ultrasonic cleaning equipment is idle. Last SCHWING company's technical staff to determine the power generator problems after site inspection, spare parts need to be replaced. But since then it has not been SCHWING contact the Division I, has not received the relevant spare parts in order to effectively deal with the failure. <br>2, vacuum cleaning furnace filter water ring pumps smoke was white mist taste great and irritating, and this phenomenon when just getting a small taste of smoke is very different, leading to risky environmental compliance. Our analysis of the problems that may occur as a catalyst catalysis, and to raise the issue later if the replacement catalytic resolved, our company can undertake this part of the catalyst cost of spare parts. But the company has not determined SCHWING solution to this problem. <br>3, the last time the furnace body damaged material temperature sensor, SCHWING has brought back to Germany, new spare parts but has not yet been sent to Division I, ask them as soon as possible the new material temperature sensor spare parts sent to our company. <br>4, 1, February issue emerging: the furnace chamber to the suction vacuum line between catalyst catalytic often prone to clogging agglomeration oligomers, Division I operators often need to clean this. <br>      For the above-mentioned problems arise, our first time to have contact, but the company SCHWING processing efficiency is too low, please help Wang mailing address these issues. Thank you!

Wang: Hello!<br>     Our filter cleaning device has been the following problems:<br>1, ultrasonic cleaning has not been able to achieve the desired effect, the ultrasonic cleaning equipment is always idle. The last SCHWING technical staff on-site inspection after the judgment is a power generator problem, need to replace spare parts. However, since then SCHWING has not contacted us, nor has it received the relevant spare parts to effectively deal with the above-mentioned failures.<br>2, filter vacuum cleaning furnace water ring pump smoke taste is very white mist and irritating, this phenomenon and just started when the smoke taste is very small, resulting in great environmental compliance risk. After our analysis may be for catalyst catalytic problems, and proposed that if the replacement of catalyst after the problem is resolved, I Division can bear this part of the catalyst spare parts costs. However, SCHWING has not determined a solution to this problem.<br>3, the last furnace damaged material temperature sensor, SCHWING has been brought back to Germany, the new spare parts have been delayed to send to us, please the other side as soon as possible to the new material temperature sensor spare parts to our division.<br>4, 1, February emerging problems: the furnace cavity to the catalyst catalytic between the suction vacuum line is often prone to low-polymer clogging clumpphenomenon, I division operators need to often clean up this.<br>      For the above-mentioned problems, I division is the first time to contact, but SCHWING company processing efficiency is too low, also ask edgout Wang to help as soon as possible to contact to deal with the above-mentioned problems. Thank you!

Mr. Wang: Hello!<br>At present, our filter cleaning device has the following problems:<br>1. Ultrasonic cleaning has been unable to achieve the desired results, and now the ultrasonic cleaning equipment is always idle. After the last on-site inspection by the technicians of SCHWING company, it was determined that there was a problem with the power generator and the spare parts needed to be replaced. However, SCHWING has not contacted our company since then and has not received relevant spare parts to effectively handle the above faults.<br>2. The smoke smell of the water ring pump of the filter vacuum cleaning furnace is very white fog and irritant, which is very different from that of the first start-up, which leads to a great risk of environmental compliance. After the analysis, our company may have problems with catalyst catalysis, and proposes that if the problem is solved after catalyst replacement, our company can bear the cost of this part of catalyst spare parts. However, SCHWING has not determined the solution to this problem.<br>3. The material temperature sensor damaged in the furnace last time, SCHWING company has brought back to Germany, but the new spare parts have not been sent to our company. Please send the new material temperature sensor spare parts to our company as soon as possible.<br>4. New problems in January and February: the suction vacuum pipeline from furnace chamber to catalyst catalyst is often prone to oligomer blocking and caking, which our company's operators need to clean up frequently.<br>For the above problems, our company contacted at the first time, but SCHWING company's handling efficiency is too low, and President Wang is also requested to help us to contact and handle the above problems as soon as possible. Thank you!