第一步：拆除相邻两铝合金桁架间连接件的销轴及发卡；第二步：按次序拆除连

The first step: removal of the pin and the adjacent truss connector between issuing two aluminum; <br>Step: releasable attachment to fasteners in sequence between the aluminum steel support trusses and Φ48, all non-disposable fastener removed; <br>the third step: removal of aluminum truss and stow; <br>fourth step: removal of the fixing member between the adjacent Φ48 steel support structure. <br>Step 5: All Aluminum trusses are removed, one by one removal of expansion bolts, and the steel support Φ48 corresponding removal is laid;

第一步：拆除相邻两铝合金桁架间连接件的销轴及发卡；<br>第二步：按次序拆除连接于铝合金桁架和Φ48钢管支撑间的扣件，严禁一次性将所有扣件拆除；<br>第三步：拆除铝合金桁架并摆放好；<br>第四步：拆除Φ48钢管支撑与相邻结构间的固定件。<br>第五步：所有铝合金桁架都拆除后，逐一拆除膨胀螺栓，并将对应的Φ48钢管支撑拆除摆放好；

The first step is to remove the pin shaft and the card of the connecting piece between the two adjacent aluminum alloy trusses;<br>Step 2: remove the fasteners between the aluminum alloy truss and the Φ 48 steel pipe support in sequence, and it is strictly prohibited to remove all the fasteners at one time;<br>Step three: remove the aluminum alloy truss and place it well;<br>Step 4: remove the fixings between the Φ 48 steel pipe support and the adjacent structure.<br>Step 5: after all the aluminum alloy trusses are removed, remove the expansion bolts one by one, and remove the corresponding Φ 48 steel pipe supports and place them properly;