从包装袋取出适配器，并接上需测试的适配器头，如图1，工单如配两种适配器

Take out the adapter from the packaging bag, and connect the adapter head to be tested, as shown in Figure 1. If the work order is equipped with two adapter heads, it needs to be connected to the test. <br>Test the fixture, as shown in Figure 2, insert the adapter into the test fixture. As shown in Figure 3, when the green light of the tooling is on, the adapter test is qualified, and the red light of the tooling is not on, the test is unqualified. <br>Adapters that pass the test are placed separately. Check if the adapter looks abnormal.

Take out the adapter from the packaging bag and connect the adapter head to be tested, as shown in Figure 1. If the work order is equipped with two kinds of adapter heads, it needs to be connected for testing.<br>Power on the test tooling, as shown in Figure 2, and insert the adapter into the test tooling. As shown in Figure 3, when the green light of the tooling is on, it means that the adapter test is qualified, and if the red light of the tooling is not on, the test is unqualified.<br>The adapters that pass the test shall be placed separately. Check whether the appearance of the adapter is abnormal.

Take out the adapter from the packaging bag and connect the adapter head to be tested. As shown in Figure 1, if the work order is equipped with two kinds of adapter heads, it needs to be connected for testing. Test fixture, as shown in Figure 2, insert the adapter into the test fixture. As shown in Figure 3, when the fixture green light is on, the adapter is qualified in the test, while when the fixture red light is not on, the test is unqualified. Qualified adapters are placed separately. Check the appearance of the adapter for abnormalities.