一般锑矿石经过鄂式破碎机粗碎后进入细碎机细碎，细碎设备的选择需要根据实

Generally, antimony ore is coarsely crushed by a jaw crusher and then enters into a fine crusher for fine crushing. The selection of fine crushing equipment needs to be determined according to the actual situation. A hammer crusher can be used for fine crushing. The investment is small and the return is fast. However, the powdery ore produced by hammer crushing is more It has a certain impact on the recovery of antimony minerals. The fine crushing equipment can also be a rod mill. The rod mill has high fine crushing efficiency, low wear and tear, high normal working rate, and is not easy to overgrind, which is very beneficial for the subsequent reselection process. The finely crushed materials are directly fed into the jig machine for re-election to obtain pure antimony ore concentrate, and then the concentrate and tailings are dewatered separately through a dewatering screen and transported to the destination site for storage.

General palladium ore after the E-type crusher thick shredding into fine shredder fine shredding, fine shredding equipment needs to be determined according to the actual situation, can be used hammer crusher fine shredding, small investment, fast returns, but hammer break produced more powdered ore, the recovery of tantaclic minerals have a certain impact. Fine shredding equipment can also be selected rod grinder, rod mill fine crushing efficiency is high, consumables loss is low, high normal work rate, and not easy to over-grind, for the subsequent re-election process is very favorable. Finely grated materials directly into the jump machine re-election can obtain pure tantapite refined ore, and then through dehydration sieve to the essential tailings separately dehydrated, transported to the destination site storage.

Generally, antimony ore enters into fine crushing machine after coarse crushing of E-crusher. The selection of fine crushing equipment shall be determined according to the actual situation. It can be finely broken by hammer crusher, with small investment and fast income. However, there are many powdery ores produced by hammer breaking, which has certain influence on the recovery of antimony minerals. The fine crushing equipment can also be used as rod mill. The fine crushing efficiency of rod mill is high, the wear parts loss is low, the normal working rate is high, and it is not easy to pass grinding. It is very beneficial for the subsequent re selection process. The fine crushed materials can be directly separated into jigger to obtain pure antimony concentrate, and then the concentrate tailings are dehydrated by the dehydration screen and transported to the destination site for storage.<br>