1、桥内开口销与桥壳动态干涉—偶发问题2、板簧导向板安装间隙不均3、输

1. The dynamic interference between the cotter pin and the axle housing in the bridge-occasional problems <br>2. The uneven installation gap of the leaf spring guide plate <br>3. The dynamic interference of the input shaft knocking deformation-the occasional problem <br>4. There is no trace of knocking in the deformation of the dust plate, preliminary doubts When the sling is shifted during the frame turning process, it will rub the dust board and cause deformation.

1, the opening pin and the dynamic interference of the bridge shell - occasional problems<br>2, the reed guide plate installation gap uneven<br>3, input shaft bump deformation produces dynamic interference - occasional problems<br>4, dust plate deformation problem has no bump marks, the initial suspicion of frame flip process sling offset will be dust-proof plate, resulting in deformation.

1. Dynamic interference between split pin in bridge and bridge shell<br>2. Uneven installation clearance of leaf spring guide plate<br>3. Dynamic interference caused by collision deformation of input shaft - occasional problem<br>4. There is no collision mark on the deformation of the dust-proof plate. It is preliminarily suspected that the dust-proof plate will be scratched after the sling deviation during the frame turning process, resulting in deformation.