#2号：充电盒ESD管，供应商12月27日提供报告，再作进一步分析及提

No. # 2: The charging case ESD pipe, suppliers report December 27, and then further analysis and propose appropriate prevention measures. <br>Headphones: need to increase the low-power circuit board but there is not enough space, adding For low-power circuit board and a headset need to change, charging the mold box to be re-opening the mold, which involves development costs, tooling costs, the product itself Price of the issue. In the early part of this development on this product evaluated without low-power circuits, but warehousing takes about six months for the product to do the charging operation. In view of the additional costs and sales volume is relatively small problems, suggestions during the development of your company by the definition of the product aging timely charge. Please inform your company assessment.

#2号: Charging box ESD tube, supplier series december 27 to provide a report, and then further analysis and put forward the corresponding prevention measures.<br> Headphones: need to add low-power circuit, but the current board space is not enough, if you need to add low-power circuit, need to re-reform the board and its headphones, charging box mold needs to re-open the mold, which involves the development fee, mold fee, the product itself unit price problem. This part of this product development early on the evaluation of the non-low-power circuit, but into the warehouse about 6 months to do the product charging action. In view of the additional costs and the relatively small volume of product sales, it is recommended that your company according to the development period of the definition of countermeasures to timely aging of the product charging. Please inform you of your assessment.

#No.2: ESD tube of charging box, the supplier shall provide a report on December 27, and then make further analysis and propose corresponding preventive measures.<br>Earphones: low power circuits need to be added, but the board space is not enough at present. If low power circuits need to be added, the board and its earphones and charging box mould need to be re opened, which involves the development cost, mould cost and the unit price of the product itself. This part has been evaluated in the early stage of product development without adding low-power circuits, but needs to charge the product for about 6 months after warehousing. In view of the problem that the additional cost and the sales volume of the products are relatively small, it is suggested that your company should timely charge the aging of the products according to the countermeasures defined in the development period. Please let us know.