2. 전유기체는 가공 과정에서 항상 집력력, 절삭력, 절삭열처리

2. In the whole process of machining, the precision of cutting, cutting force, and cutting heat treatment are always deformed due to factors such as cutting forces, thereby reducing processing precision. And to prevent deformation, there are a few things to keep in mind: <br><br><br><br>a) Reduce endurance or reduce the impact of fast slicing; coarse and fine machining should be separated, and coarse machining can be finely machined. You can also make corrections at, and increase or decrease the amount of pickles without supplemental distribution. <br><br>b) Reduce the effect of depletion force and take some measures in the craft. Reduce the dispersal force and reduce the deflection force, so that it does not focus on any part of the accessory and distributes the pressure in a relatively large plane. It reduces the deformation under low pressure, and it can also fit the product in it.

2. The whole organism always reduces the processing precision during the machining process due to the influence of factors such as force, cutting force, and cutting heat treatment. There are a few things to keep in mind when it comes to preventing deformation:<br><br>a) Reduce endurance or reduce the effect of rapid slice.<br><br>b) reduce the effect of the zip-down force and reduce the dispersion force can take some action on the craft, and do not focus on any part of the accessory by reducing the deformation piping force and receiveless pressure from the unit area of the accessory by allowing the pressure to be distributed in a relatively large plane.

2。专有气体在加工过程中，经常受到集中力、切削力、切削热处理等因素的影响，发生变形，降低加工精密度。并且防止变形，要注意以下几点：<br>a）减少耐力或快速切好时的影响。粗糙的加工和细致的加工需要分离，粗糙的加工导致的变形可以在细致的加工中进行更正，并且不进行辅助分配，减少断奶量。<br>b）减少集中力的影响，减少工艺上可能采取一些措施的多分散力，减少变形集中力，不集中在器件的某一部分，将压力分布在较大的平面上，从而减少器件单位面积的压力，使其变形减少，并且可以将产品插入其中。<br>