优化BA18的ipst报警kpi。由于有的机械故障由于没有传感器检测所

Optimize the ipst alarm kpi of BA18. Because some mechanical faults are not detected by sensors, alarms cannot be issued, and the time taken to repair and resolve the fault cannot be recorded in the IPST system. In order to solve this problem, we cooperated with the supplier to add a manual T alarm function. If a mechanical failure occurs but the system does not alarm, the manual T alarm is activated during the maintenance process and resets after the fault repair is completed, so that the KPI displayed by ipst is closer to the production line. The true situation.

Optimize IPST alarm kpi for BA18. Due to some mechanical faults that cannot be detected by sensors, an alarm cannot be issued, and the time for repairing and resolving the fault cannot be recorded in the IPST system. To address this issue, we have collaborated with the supplier to add a manual T alarm function. If a mechanical malfunction occurs but the system does not alarm, the manual T alarm will be activated during the maintenance process. After the fault repair is completed, it will be reset to make the kpi displayed on the IPST closer to the actual situation of the production line.

Optimize the ipst alarm kpi of BA18. Due to some mechanical faults, it is impossible to give an alarm because there is no sensor detection, and the time of maintenance and troubleshooting cannot be recorded in IPST system. In order to solve this problem, we cooperated with suppliers to increase the manual T alarm function. If a mechanical fault occurs but the system does not give an alarm, the manual T alarm will be activated during the maintenance and reset after the fault maintenance is completed, so that the kpi displayed by ipst is closer to the real situation of the production line.