液晶FPC与主板连接。取主板，将主板上的液晶连接器座盖子打开，将液晶F

The LCD FPC is connected to the motherboard. <br><br>Take the motherboard, open the LCD connector cover on the motherboard, and insert the LCD FPC gold fingers into the connector straight down, as shown in Figure 1, the silk screen needs to be flush with the connector opening, and then cover the connector cover, as shown in the figure 2. Be careful not to fold the FPC cable of the LCD, and then cover the mainboard vertically to the upper shell assembly of the whole machine, as shown in Figure 3. <br><br>The LCD cable should be connected in place, and the cable should not be folded, reversed, or not connected properly.

The LCD FPC is connected to the motherboard.<br>Remove the main board, open the cover of the LCD connector base on the main board, and insert the LCD FPC gold finger straight down into the connector, as shown in Figure 1. The silk screen needs to be flush with the connector opening, and then cover the connector cover, as shown in Figure 2. Note that the FPC cable of the LCD shall not be dead folded, and then vertically cover the main board to the upper shell assembly of the whole machine, as shown in Figure 3.<br>The LCD cable shall be connected in place, and the cable shall not be dead folded, reversed or not connected in place.

The LCD FPC is connected with the motherboard. Take the motherboard, open the cover of the LCD connector seat on the motherboard, and insert the LCD FPC golden finger straight down into the connector. As shown in Figure 1, the silk screen should be flush with the connector opening, and then cover the connector cover. As shown in Figure 2, pay attention to the fact that the FPC cable of the LCD must not be folded, and then cover the motherboard vertically and externally onto the upper shell assembly of the whole machine, as shown in Figure 3. The LCD flat cable is plugged in place, and the flat cable must not be folded, reversed or not connected properly.