控制过程电气设备的启动顺序为:首先启动搅拌电机M4; 然后打开电磁阀，

控制过程电气设备的启动顺序为:首先启动搅拌电机M4; 然后打开电磁阀，接通物料A的输送电机M1、电子皮带秤、电动调节阀、电磁流量计及PLC的电源。通过电子皮带秤和电磁流量计的反馈信号适时地调节M1电机和电动调节阀，以控制物料A和物料B的输送量。对于现在的技术发展情况想要达到预想的设计结果就需要完成对继电器、单片机、工业控制计算机和可编程程序控制器的控制。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

The starting sequence of the electrical equipment in the control process is: first start the stirring motor M4; then open the solenoid valve and connect the power supply of the material A conveying motor M1, electronic belt scale, electric regulating valve, electromagnetic flowmeter and PLC. Through the feedback signal of the electronic belt scale and the electromagnetic flowmeter, the M1 motor and electric regulating valve can be adjusted in time to control the delivery amount of material A and material B. For the current technological development, if you want to achieve the desired design results, you need to complete the control of the relay, single chip, industrial control computer and programmable program controller.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

The start-up sequence of the electrical equipment for the control process is as follows: first start the mixing motor M4; Then open the solenoid valve, connected material A's transport motor M1, electronic belt scale, electric adjustment valve, electromagnetic flow meter and PLC power supply. The M1 motor and the electric control valve are adjusted in a timely manner through the feedback signalof of the electronic belt scale and the electromagnetic flow meter to control the delivery of material A and Material B. For today's technological developments, achieving the desired design results requires the completion of control of relays, microcontrollers, industrial control computers, and programmable program controllers.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

The starting sequence of the electrical equipment in the control process is as follows: first start the mixing motor M4; then open the solenoid valve and connect the power supply of the conveying motor M1, electronic belt scale, electric control valve, electromagnetic flowmeter and PLC of material a. Through the feedback signals of electronic belt scale and electromagnetic flowmeter, M1 motor and electric control valve are timely adjusted to control the conveying capacity of material a and material B. In order to achieve the expected design results for the current technological development, it is necessary to complete the control of relays, single-chip computers, industrial control computers and programmable controllers.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.