（二）操作程序1．将主机按要求安装在平整的场地，四个地脚用膨胀螺栓固定

(2) Operating procedures <br>1. Install the host on a flat site as required, and fix the four feet with expansion bolts to ensure the horizontal stability of the equipment. <br>2. Before starting, you must remove the transportation fixing plate, check whether the connecting parts of the machine are loose, and whether the rotating parts and movable parts are bumped, bumped, stuck, etc., and solve the problems in time. <br>3. Turn on the power, jog the start switch, and check whether the steering of each part of the machine is correct.

(2) Operating procedures.<br>1. The host is installed in a flat field as required, and the four feet are secured with expansion bolts to ensure the level of the equipment is stable.<br>2. Before starting, the transport fixing plate must be removed, check the machine parts of the connection loose, as well as the rotating parts, moving parts of the touch, collision, card and other phenomena, found that the problem is resolved in a timely manner.<br>3. Switch on the power supply, tap the start switch, and check that the steering is correct in all parts of the machine.

（2） Operating procedures<br>1. Install the main engine on the flat site according to the requirements, and fix the four anchors with expansion bolts to ensure the level and stability of the equipment.<br>2. Before start-up, the transport fixed plate must be removed to check whether the connection parts of the machine are loose, and whether the rotating parts and moving parts are collided, collided and stuck, and solve the problems in time.<br>3. Turn on the power supply and jog the start switch to check whether the steering direction of each part of the machine is correct.