卡箍生产1. 取作业指导书放在工具桌前，确认模具状况；2. 领取合格模

Production clamp <br>1. Take the operating instructions on the tool table, confirm status mold; <br>2. the mold to receive a passing machine edge; <br>3. disposed to receive material and feeding mechanism; <br>4. Turn on the power switch, and setting the molding speed (frequency), the fixed length adjusting screw will be good and the locking screw feed length; <br>5. stationary mold mounted on the machine, the material is introduced into a mold; (per plate feed material removal head 0.8-1.2 m) <br>6. debugging jog feed mode, cutting knives, molding knives, jog whole process of production of parts, self-qualified; <br>7. turn on the automatic production of molded parts, test switch, do three test subject; <br>8. after passing the first inspection, production.

卡箍生产<br>1. 取作业指导书放在工具桌前，确认模具状况；<br>2. 领取合格模具到机台边；<br>3. 领取材料并置于上料机构；<br>4. 开启电源开关，并设定成型速度（频率），调节定长螺杆定好送料长度并锁紧螺杆；<br>5. 模具装上机器固定，材料引入模具内；（每盘材料去除料头0.8-1.2米）<br>6. 点动调试料模、切断刀、成型刀、点动全过程生产零件，自检合格；<br>7. 开启自动成型开关试生产零件，做三检检验；<br>8. 首检合格后，批量生产。

Clamp production<br>1. Take the operation instruction and put it in front of the tool table to confirm the mold condition;<br>2. Get the qualified mold to the machine platform;<br>3. Collect materials and place them in the feeding mechanism;<br>4. turn on the power switch, set the molding speed (frequency), adjust the fixed length screw to set the feeding length and lock the screw;<br>5. The mold is fixed by the machine, and the material is introduced into the mold; (0.8-1.2m material removal head per plate)<br>6. The parts produced in the whole process of inching adjustment test mold, cutting knife, forming knife and inching are qualified by self inspection;<br>7. Turn on the automatic forming switch for trial production of parts, and conduct three inspection;<br>8. Mass production after the first inspection.<br>