1、员工在装配过程发现问题未及时返修，而是用手向上推住玻璃，使玻璃上升

1, during assembly workers found the problem not timely repair, but is pushed by hand to live up glass, glass increases to a vertex offline, final inspection during inspection glass rose again found not normally fall to the vertex of the lift; <br>2, wire analysis showed that the door panels is mounted within the assembly, the glass tends to guide the upper glass seal crimp pressing in the rail, resulting in an interference seal with the glass of the glass can not rise to a normal apex.

1, the staff in the assembly process found that the problem is not timely repair, but by hand pushed up the glass, so that the glass rose to the apex after the line, the final inspection process check the glass lift found that the fall can not rise to the apex again normal;<br>2, on-line analysis found that the installation of the door inner guard assembly when the glass easy to the upper glass rail seal squeeze curled in the rail, resulting in sealing strip and glass interference so that the glass can not rise normally to the apex.

1. In the process of assembly, the employee found that the problem was not repaired in time, instead, he pushed the glass up with his hand to make the glass rise to the top and then come off the line. During the final inspection, he found that the glass could not rise to the top again after falling;<br>2. Through online analysis, it is found that when installing the door inner guard board assembly, the glass is easy to squeeze and crimp the sealing strip of the upper glass guide rail in the guide rail, resulting in the interference between the sealing strip and the glass, so that the glass cannot rise to the top normally.<br>