The requirements of CISPR 25 Edition 3,ALSE method,shall be used for verification,The settings for GPS L1 shall be used for all GNSS.bandsSettings and test method used for 1000-2500MHz shall be used for all other bands above 2500MHz。The DUT shall conform to each defined requirement i.e. at frequencies where more than one detector is specified,all requirements apply simuitaneously.The DUT shall be orientated in three(3) orthogonal directions.TO decrease the test time required,the QP limits may be validated with a peak detector.IF the QP limit is exceeded with the peak detector a retest with the QP detector is required.