造成笔杆表面不干净主要原因：1.现场环境较差。2.各工序对产品的防护不

The main reasons for the unclean surface of the pen holder: <br>1. The on-site environment is poor. <br>2. The protection of products in each process is not in place. <br>3. There are shavings in the white gloves of the liner, and the pen holder is easy to attract. <br>4. The packaging bags of each process use old bags, which are dusty. <br>The main reasons for the scratch of the pen barrel: <br>1. The operator is taking the pen barrel, and the nails on the hand cause scratches on the pen barrel. The material of the pen barrel is soft glue, which is easy to damage. <br>2. When the tail sleeve processing machine is unloading, the pen barrel is easy to collide with a certain force, causing damage to the pen barrel. <br>3. The product placement in the scribing process is messy, which can easily cause scratches. <br>4. The inclination of the table on which the product is placed on the packaging worktable is too large, which is inconvenient to handle and easy to fall off, causing secondary scratches on the pen barrel. <br>Reasons for outflow: <br>1. Staff awareness is weak. <br>2. The quality management personnel do not pay enough attention to the appearance of the product and focus on shifting the control direction.

The main reasons for the dirty surface of the pen rod are:<br>1. The scene environment is poor.<br>2. The protection of the products in each process is not in place.<br>3. The white gloves of the dasher have crumbs, and the pen rod is easy to absorb.<br>4. Each process bag in the use of old bags, there is dust.<br>The main causes of stroke:<br>1. The operator is taking the pen rod, the fingernails on the hand causescratch, the pen rod material is soft glue, easy to damage.<br>2. When the tail sleeve machine material, the pen rod is easy to produce a certain force collision, resulting in the pen rod damage.<br>3. Scratch process productplacement messy, easy to cause scratches.<br>4. Packaging workbench placement products over the table slope over the big, take inconvenience, easy to slip, resulting in pen rod secondary scratch.<br>Reason for outflow:<br>1. Employee awareness of the quality of awareness is weak.<br>2. Quality management personnel on the appearance of the product attention is not enough, focus on the control direction offset.

The main reasons for the unclean surface of the pen holder are as follows:<br>1. The site environment is poor.<br>2. The protection of each process to the product is not in place.<br>3. The white gloves of the scribe have hair chips, and the penholder is easy to absorb.<br>4. Old bags are used in each process, with dust.<br>The main reasons for the scratch of the pen holder are as follows:<br>1. When the operator takes the penholder, the fingernail on his hand will scratch the penholder. The penholder is made of soft glue, which is easy to be damaged.<br>2. When the tailstock processing machine is cutting, the pen holder is easy to produce a certain force collision, resulting in pen holder damage.<br>3. The marking process products are placed in disorder, which is easy to cause scratches.<br>4. The slope of the table where the products are placed on the packing table is too large, which is inconvenient to take and easy to slide, resulting in the second scratch of the penholder.<br>Outflow reason:<br>1. The awareness of quality is weak.<br>2. The quality management personnel did not pay enough attention to the appearance of the product and focused on controlling the direction deviation.