联锁装置 所有活动式防护装置（如安全门），对人员作业、调试或维修时可能

Interlock <br>all moveable guard (safety gate), personnel work, could cause harm to the danger zone, and the inability to set a fixed protection out of the discharge port when commissioning or maintenance, take interlocks to protect personnel enter the danger zone before The equipment stops automatically; <br>after the interlocking device is started, the dangerous parts can be quickly stopped and a prompt is displayed on the operation screen, and the equipment can be restarted only when the interlocking circuit is connected (such as the interlocking door is closed) and the device is reset; the <br>interlocking device It should be connected and control all driving energy of the device, including but not limited to electric energy and compressed air energy. When the interlocking device is activated, these driving energy should be cut off, and the remaining energy in the moving parts of the equipment, such as compressed air in the cylinder, should be released at the same time. <br>The interlocking device must not be set to the "stop" (OFF) state in the operation panel; the <br>interlocking device cannot replace the normal stop, reset and start switches of the equipment.

Interlocking device. <br>All active protective devices (e.g. safety doors), hazardous areas where injury may be caused during work, commissioning or maintenance, and access to and from the gate where fixed protection cannot be set up, etc., are interlocked to ensure that equipment stops automatically before entering the hazardous area; <br> After the interlocking device is started, the hazardous parts can be stopped quickly and prompted on the operating screen, and the device can be restarted only after the interlock circuit is connected (e.g. interlocking door is closed) and the device is reset; <br> The interlocking device shall be connected and may control all drive energy of the device, including but not limited to electrical and compressed air energy. When the interlocking device is activated, the drive energy should be cut off and the remaining energy in the moving parts of the device, such as compressed air in the cylinder, should be released. <br> The interlocking device must not be set to the "OFF" state in the operator panel; <br> The interlocking device does not replace the normal stop, reset, and start switch of the device.

Interlocking device<br>All movable protective devices (such as safety doors), dangerous areas that may cause injury during personnel operation, commissioning or maintenance, as well as material inlet and outlet that cannot be set with fixed protection, shall be interlocked to ensure that the equipment stops automatically before personnel enter the dangerous area;<br>After the interlock device is started, it can quickly stop the dangerous parts and prompt on the operation screen, and only when the interlocking circuit is connected (such as the interlocking door is closed) and the equipment is reset, the equipment can be restarted;<br>The interlocking device shall be connected to and control all driving energy of the equipment, including but not limited to electric energy, compressed air energy. When the interlock is activated, these driving energy shall be cut off and the remaining energy in the moving parts of the equipment, such as compressed air in the cylinder, shall be released.<br>The interlocking device shall not be set to "off" state in the operation panel;<br>The interlock device cannot replace the normal stop, reset and start switch of the equipment.<br>