装料完成后，可进行干燥循环作业，如果机内有含水率≥28%的粮食时，应在

After the filling is completed, the drying cycle operation can be carried out. If there is grain in the machine with a water content of ≥28%, the continuous cycle operation should be carried out within 1 hour after the installation to prevent the high moisture grains from heating up and blocking the machine. After the drying cycle is started, the system will automatically start the elevator, the down agitator, the grain dial wheel and the exhaust fan to perform the cycle drying operation. At this time, there will be hot air evenly drying through the grain layer.

After loading, can carry out drying cycle operation, if there is a water content of 28% of the grain, should be installed within 1 hour of continuous circulation operation, in order to prevent high moisture grain heat ingress clogging the machine. After opening the drying cycle, the system will automatically start the lifter, the next stir-dragon, dial grain wheel and exhaust fan, for cycle drying operation, at this time there is hot air evenly through the grain layer drying operation.

After loading, drying cycle operation can be carried out. If there is grain with moisture content ≥ 28%, continuous circulation operation should be carried out within 1 hour after loading to prevent high moisture grain from heating and blocking the machine. After the drying cycle is started, the system will automatically start the elevator, the lower auger, the grain wheel and the exhaust fan in order to carry out the circulation drying operation. At this time, hot air will evenly pass through the grain layer for drying.<br>