c) The connectors specified below shall be vibrated at a vibrating acceleration of 686m/s2 (at an arbitrary frequency) for 30 min./direction totaled at 1.5 hours. Applicable connectors: RV-H, RS, RK (Use connectors already subjected to the total current cycle test.) (2) Performance Throughout the vibration test, the connector shall not have an instantaneous disconnection of 1V or more in voltage drop last for 10us or more. Except for c) above, the connectors shall satisfy the following requirements after tested: 2.2.1 Voltage drop 2.2.3 Wire fastening force 2.2.7 Temperature rise