A :2000吨15层铝基覆铜板热压机 :本机是整套机组的重要组成设备

A: 2000 tons of 15-layer aluminum-based copper clad laminate hot press: This machine is an important component of the entire unit. The spreading raw materials are sent to the vacuum aluminum-based copper clad laminate hot press through the push-pull board machine, and the product is formed by vacuuming-heating-pressurizing-curing-cooling and other processes, and the quality of the pressed product Much depends on the accuracy of the vacuum aluminum-based copper clad laminate hot press. <br>B: Aluminum-based copper clad laminate cold press: This machine is designed with a total pressure of 400 tons, and it uses normal temperature water circulation to quickly cool and shape the product, improve production efficiency and improve product quality. After the hot pressing process is completed, it is transported from the vacuum aluminum-based copper clad laminate hot press to the cold press by a mobile push-pull board machine, so that the vacuum aluminum-based copper clad laminate hot press continues to cycle. <br>C: Mobile push-pull trolley unit: This mobile trolley automatically completes the heating, cold press feeding, discharging and the corresponding connection of the fixed feeding and discharging cage to complete a push-pull process. This part is the main machine for transporting materials to complete the transportation of materials in various processes and complete the docking with the in and out of the material cage, the vacuum aluminum-based copper clad laminate hot press, and the cold press. This machine is responsible for the entry and exit of 5 corresponding stations. <br>D: Feeding cage: This machine cooperates with the feeding and spreading turnover line to complete the layering of the spreading raw materials and accurately feed and position them in the feeding cage, and then move it The push-pull board machine is connected to complete the pressing process of feeding into the vacuum aluminum-based copper clad laminate hot press. <br>E: Discharging cage: This machine cooperates with the finished product line to complete the layering and accurate positioning of the pressed finished product to the semi-finished product line for the next step of edge loading and packaging. It is a vacuum aluminum-based copper clad laminate hot press unit The last process. <br>F: Press hydraulic system: This component participates in the pressure control of vacuum aluminum-based copper clad laminate hot press and aluminum-based copper clad laminate cold press. Make the aluminum-based copper-clad vacuum hot press and cold press work within the specified pressure range. Ensure that the pressure parameters of the product in the manufacturing process are stable and accurate. <br>G: Vacuum system: This component cooperates with the hot press to exhaust the air in the aluminum-based copper clad laminate hot press chamber, so that the inside of the hot press reaches a vacuum state to ensure that no bubbles are generated on the product plane, and the quality of the product is guaranteed.<br>H: Electrical control system: This component is the brain of the whole unit, which controls the actions of the whole unit. Control of the entire process of feeding-sliding plate machine-heating-pressurizing-vacuum-cooling-sliding plate machine-cold pressing-cutting.

A: 2000 tons of 15-layer aluminum-based copper plate hot press: this machine is an important component of the whole unit equipment. The paved raw materials, through the push-pull plate machine into the vacuum aluminum-based copper plate hot press, after vacuum - heating - pressurization - curing - cooling and other processes, so that the product molding, the quality of the suppressed products largely depends on the accuracy of the vacuum aluminum-based copper plate press.<br>B: Aluminum-based copper plate cold press: the total pressure of the machine design 400 tons, the use of warm water circulation, can make the product quickly cool down stereotypes, improve production efficiency, improve product quality. After the completion of the thermal press process, the mobile push-puller is transported from the vacuum aluminum-based copper plate hot press to the cold press so that the vacuum aluminum-based copper plate hot press can continue to cycle.<br>C: Mobile push and pull trolley unit: This mobile car automatically completes the heat. Cold press feed. The corresponding connection between the material and the fixed entry and exit cage completes a push-and-pull process. This part is the main host of the transport material to complete the material in the various processes of transport and complete with the entry and exit cage. Vacuum aluminum - based copper plate hot press. The butt of the chiller. This machine is responsible for the entry and exit of 5 corresponding seats,<br>D: Feed cage: this machine and the upper material spread turnover line, complete the spread of raw materials layering and accurate feeding positioning stored in the feeding cage, and then by the mobile push-pull plate machine docking, complete the upper material into the vacuum aluminum-based copper plate hot press press suppression process.<br>E: Feeding cage: this machine and the finished product line, complete the suppression of the finished product layering and accurate positioning to the semi-finished product line, for the next step of the edge and packaging, is the vacuum aluminum-based copper plate thermal pressure unit of the last process.<br>F: Press hydraulic system: This component is involved in the pressure control of the vacuum aluminum-based copper plate hot press and the aluminum-based copper plate chiller. The aluminum-based copper vacuum press and the cold press operate within the specified pressure range. To ensure that the pressure parameters of the product in the manufacturing process is stable and accurate.<br>G: Vacuum system: This part with the hot press, the aluminum-based copper plate hot press chamber air discharge, so that the inside of the hot press to achieve a vacuum state, to ensure that the product plane does not produce bubbles, to ensure high-quality product quality.<br>H : Electrical control system: This component is the brain of the whole unit, which controls the movement of the whole unit. The whole process material - push and pull board machine - heating - pressurized - vacuum - cooling - push and pull board machine - cold pressure - under the control of such actions.

A: 2000 tons 15 layer aluminum based copper clad laminate hot press: This machine is an important component of the whole set of equipment. The spread raw materials are sent to the vacuum aluminum based copper clad laminate hot press through the push-pull plate machine, and the products are formed through the process of vacuumizing heating pressurizing solidification cooling. The quality of the pressed products largely depends on the accuracy of the vacuum aluminum based copper clad laminate hot press.<br>B: aluminum based copper clad laminate cold press: the total design pressure of the machine is 400 tons, and the normal temperature water circulation is adopted, which can make the product quickly cool and shape, improve the production efficiency and improve the product quality. After the hot pressing process is completed, it is transported from the vacuum copper clad laminate hot press to the cold press through the moving push-pull plate machine, so as to facilitate the continuous circulation of the vacuum aluminum based copper clad laminate hot press.<br>C: Mobile push-pull trolley unit: the mobile trolley can automatically complete the feeding and discharging of hot and cold press and the corresponding connection of fixed inlet and outlet cages to complete a push-pull process. This part is the main machine to transport materials, complete the transportation of materials in each process, and complete the docking with feeding cage, vacuum aluminum based copper clad laminate hot press and cold press. This machine is responsible for the entry and exit of 5 corresponding stations,<br>D: Feeding cage: the machine cooperates with the feeding and spreading turnover line, completes the layering of the paved raw materials, accurately feeds and stores them in the feeding cage, and then connects with the mobile push-pull plate machine to complete the pressing process of feeding into the vacuum aluminum-based copper clad laminate hot press.<br>E: Discharge cage: This machine is used to coordinate with the finished product line to complete the lamination and accurate positioning of the pressed finished product to the semi-finished product line for further edge loading and packaging. It is the last process of the vacuum aluminum based copper clad laminate hot pressing unit.<br>F: Press hydraulic system: this part is involved in the pressure control of vacuum aluminum based copper clad laminate hot press and aluminum based copper clad laminate cold press. The vacuum hot press and cold press can work in the specified pressure range. Ensure the stable and accurate pressure parameters of products in the manufacturing process.<br>G: vacuum system: this part cooperates with the hot press to exhaust the air from the hot press chamber of the aluminum based copper clad laminate hot press, so as to make the inside of the hot press reach the vacuum state, so as to ensure that the product surface does not produce bubbles and ensure the high quality of the product.<br>H: electrical control system: this part is the brain of the whole unit and controls the action of the whole unit. The whole set of process feeding - push-pull plate machine - heating - pressurization - vacuum - cooling - push-pull plate machine - cold pressing - blanking and other action control.<br>