When a Sink’s operating current changes due to a load step, load release or any other change in load level, the positiveor negative overshoot of the new load current Shall Not exceed the range defined by iOvershoot. For the purposes ofmeasuring iOvershoot the new load current value is defined as the average steady state value of the load current afterthe load step has settled. The rate of change of any shift in Sink load current during normal operation Shall Notexceed iLoadStepRate (for load steps) and iLoadReleaseRate (for load releases) as measured at the Sink receptacle.The Sink’s operating current Shall Not change faster than the value reported in the Source’s Load Step Slew Rate fieldand Shall ensure that PD Communications meet the transmit and receive masks as specified in Section 5.8.2.