Now the bird is fully dry Figure 1.

现在，鸟已经完全干燥了。图1。下一步是完成鸟的准备工作，首先要除去机翼金属丝，然后将多余的金属丝尽可能切近鸟的手腕。图2。喙。剪断尾丝，使其尽可能靠近鸟的身体，注意不要损坏鸟尾下方的羽毛。

现在鸟完全干图 1 。下一阶段是完成鸟，首先删除翼线削减多余的电线尽可能接近鸟图2的手腕。如果嘴，请从底部取出引脚。尽可能靠近鸟的身体切开尾线，注意不要损坏鸟尾下的羽毛。

Now the bird is fully dry Figure 1. The next stage is to finish the bird, start by removing the wing wires cut the excess wire as close as you can to the wrist of the bird Figure 2. Remove the pin form the underside if the beak. Cut the tail wire as close as you can to the birds body, taking care not to damage the feathers underneath the bird’s tail.<br>