6.4 当机台发生突发性断电时，可能存在反极检测信号中断的现象，极易出

6.4 When the machine occurrence of sudden power failure, there may be a phenomenon of reverse polarity detection signal interruption, the best anti-prone, and long-term storage of products at the air outlet temperature is too high undesirable phenomena generated waist transparent; and called when sudden power failure, the operator must each product on a bare disc clamp profusely, air outlet at the full product inspection

6.4 When a sudden power failure occurs on the machine, there may be the phenomenon of inverse detection signal interruption, it is very easy to appear anti-polar products, and the product storage at the blowing port is too high long-term temperature and produce the bad phenomenon of waist transparency;

6.4 in case of sudden power failure of the machine, the reverse pole detection signal may be interrupted, and the reverse pole products are easy to appear, and the products at the blowing port are stored for a long time with high temperature, resulting in the poor phenomenon of waist transparency; therefore, in case of sudden power failure, the operator must take off every naked product on the disc clamp, and conduct full inspection on the products at the blowing port<br>