NOTE1. UNSPECIFIED RADII ARE TO BE RO.5.2. UNSPECIFIFD DRAFT ANGLES ARE TO BE MIN.3. STD THICKNESS MAY BE PARTIALLY INCREASED OR DECREASED TO PREVENT SINK MARK.4. THIS PART MUST CONFORM TO FOLLOWING SPEC.MATERIAL: PC+ABS 3. OT(MS214-04 TYPE B)PAINT:B/C PAINT ENVIRONMENTAL TEST: MS 210-6-A3(COLD RESISTING TEMPERATURE:-4O℃)5. FINISH COLOR & EMBO OF THIS PART ACCORDING TO COLOR COMBI CHART.6. GARNISH SURFACE IS TO BE FREE FROM BURRS, FLASHES, SINK MARKS, etC.7. MUST BE MARKED WITH MATERIAL ACCORDING TO MS201-01.AREA: LEGIBLE AREA EXCEPT VISIBLE(ON INNER SURFACE)8. PAINT'G CONFORM TO MS655-08 TYPE D.9. MUST CONFORM TO THE LATEST VERSION OF SPEC NO. MS201-02.