仪表台左侧与车身连接支架固定点安装困难仪表台左侧与车身连接支架安装孔不

The left side of the instrument panel and the body connecting bracket fixing points are difficult to install <br>. The left side of the instrument panel and the body connecting bracket mounting holes are not correct, and the bolts are difficult to install. The <br>fixing points of the left side of the instrument panel and the body connecting bracket are fixed by a combination of round holes and long round holes, and the brackets are large. The amount of shaking cannot be accurately positioned. And the bracket is installed in advance and cannot be adjusted after laying the carpet. <br>1. The hole position deviation is difficult to assemble, which affects the production cycle. <br>2. When the deviation is large, the installation hole cannot be seen, and it needs to be repaired offline. When the repair work is increased, the vehicle will be stuck. It is <br>recommended to re-evaluate the installation method of the bracket here and optimize

The left side of the instrument stand is difficult to install with the body connection bracket fixing point<br>The left side of the instrument stand and the body connection bracket mounting hole is not correct, bolt installation is difficult<br>The left side of the instrument stand and the body connection bracket fixed point for the round hole and long round hole combination fixed, the bracket has a large wiggle volume, can not be accurately positioned. And the bracket is installed in advance, after laying the carpet can not be adjusted.<br>1, hole deviation assembly difficulties, affecting the production beat.<br>2, when the deviation is large can not see the installation hole, need to go offline repair, increase the rework time, resulting in vehicles stranded<br>It is recommended that the design re-evaluate and optimize the way the bracket is installed here

It is difficult to install the fixing point between the left side of the instrument panel and the body connecting bracket<br>The installation hole of the left side of the instrument panel and the body connecting bracket is not right, and the bolt installation is difficult<br>The fixing point of the left side of the instrument panel and the vehicle body connecting bracket is a combination of round hole and long round hole, and the bracket has a large amount of shaking, so it can not be accurately positioned. And the bracket is installed in advance, which cannot be adjusted after laying carpet.<br>1. The hole position deviation is difficult to assemble, which affects the production rhythm.<br>2. When the deviation is large, the installation hole can not be seen, so it needs to be repaired offline, increasing the repair time, resulting in vehicle detention<br>It is suggested that the design should reevaluate the installation mode of the bracket and optimize it<br>