Test cycle “Straight ahead“* WOT = Wide open throttle5 WOT*-accelerations (full load accelerations) from standstill:-performed in first gear (first gear locked in case of automatic transmission)-steering wheel position straight ahead-engine speed approx. 80% of max rpm (or max rpm allowed by rpm limiter)-After 5 WOT accelerations a cooling cycle has to be performed (smooth driving for approximately 15 minutes, maintaining a constant vehicle speed of approx. 50km/h)!4.2.2 Test cycle „Turning cycle left hand“5 WOT-accelerations from standstill:-performed in first gear (first gear locked in case of automatic transmission)-steering wheel position at full lock to left hand-engine speed approx. 80% of max rpm (or max rpm allowed by rpm limiter)After 5 WOT accelerations a cooling cycle has to be performed (smooth driving for approximately 15 minutes, maintaining a constant vehicle speed of approx. 50km/h)!4.2.3 Test cycle „Turning cycle right hand“5 WOT-accelerations from standstill:-performed in first gear (first gear locked in case of automatic transmission)-steering wheel position at full lock to right hand-engine speed approx. 80% of max rpm (or max rpm allowed by rpm limiter)After 5 WOT accelerations a cooling cycle has to be performed (smooth driving for approximately 15 minutes, maintaining a constant vehicle speed of approx. 50km/h)!4.3 Test procedure / cycle rerunsEach test cycle (4.1.1, 4.1.2, 4.1.3) has to be repeated 3 times.Total number of accelerations after completing the cycles:- 15 accelerations “straight ahead”- 15 accelerations “turning cycle left hand”- 15 accelerations “turning cycle right hand”