本车床主要用于车削内外圆柱面、圆锥面及其它旋转体零件，可加工各种常用的

This lathe is mainly used for turning internal and external cylindrical surfaces, conical surfaces and other rotating parts. It can process various commonly used metric, inch, modulus and diametral threads, and can broach oil grooves and keyways. <br>1. The bed adopts a wide-width sidewall double-reinforced plate, and the inner front plate adopts a combined structure of box and diagonal ribs. The overall rigidity is one-third higher than that of a single-wall door-shaped rib structure. <br>2. The control is centralized, the slide is equipped with a quick-moving mechanism, which is operated visually with a single handle; the main shaft is controlled by hydraulic pressure for forward and reverse conversion and brake. <br>3. The lathe has high structural rigidity and transmission rigidity, stable precision, and powerful cutting. <br>4. The sliding surface of the bed guide rail adopts TSF wear-resistant inlay layer structure, which is light and flexible in movement and has a long life; the lubrication system is circulation outside the box, which improves the processing accuracy. 5. The spindle hole is large, which can pass 4" bars; the tailstock is equipped with a dial and the marking is intuitive; the appearance of the machine is neat and beautiful, easy to wipe and maintain.

This lathe is mainly used for turning inside and outside cylindrical faces, conical faces and other rotating body parts, can process a variety of commonly used metric, imperial, analog and diameter threads, and can pull the oil grooves and key grooves.<br>1. The bed body adopts a large width side wall double rib plate, the inner front plate adopts a box and oblique rib combination structure, the overall stiffness is one-third higher than the single-wall edion structure.<br>2. The control set, the slip plate is equipped with a fast-moving mechanism, with a single handle image of the operation, the spindle is reverse conversion and the brake sized hydraulic control.<br>3. The stiffness of the lathe structure and the stiffness of the transmission are both high, the accuracy is stable, and the force is able to cut.<br>4, the slide surface of the bed body rail using TSF wear-resistant panel structure, light and flexible motion, long life, lubrication system for the out-of-box cycle, improve the processing accuracy. 5, the spindle hole is large, can be used through 4" bar material, the tail seat is equipped with a dial and wire-cutting with intuitive, the machine shape is neat and beautiful, easy to wipe and maintain.

This lathe is mainly used for turning internal and external cylindrical surface, conical surface and other rotating parts. It can process various commonly used metric, British, modulus and pitch thread, and can broach oil groove and keyway.<br>1. The bed adopts double rib plate with large width side wall, and the combined structure of box shape and inclined reinforcement is adopted for the inner front plate. The overall stiffness is one third higher than that of single wall portal rib structure.<br>2. Centralized operation. The slide plate is equipped with a quick moving mechanism, which is visually operated by a single handle; the positive and negative rotation of the main shaft and the brake are controlled by hydraulic pressure.<br>3. The structure rigidity and transmission rigidity of the lathe are both high, the precision is stable, and it can be used for powerful cutting.<br>4. TSF wear-resistant inlay structure is adopted for the sliding surface of the guide rail of the bed, which is light and flexible and has long service life; the lubrication system is circulating outside the box, which improves the machining accuracy. 5. The spindle hole is large and can pass through 4 "bar material; the tailstock is equipped with dial and marking line, which is intuitive; the machine tool is neat and beautiful, easy to wipe and maintain.