4、校正头轮轴至水平，保证头轮轴和尾轮轴在同一垂直平面内。5、固定畚斗

4. Correct the head wheel shaft to be horizontal, and ensure that the head wheel shaft and the tail wheel shaft are in the same vertical plane. <br>5. Fix the bucket belt: <br>a) Loosen the tension spring installed in the upper part; <br>b) Connect the bucket belt to the lowest part of the upper inner adjustment plate; <br>c) Bend the bucket belt at both ends to a right angle, use After the clamp plate clamps the ends of the bucket belt, connect it with connecting bolts and subtract the excess bucket belt; <br>d) After the bucket belt is connected, tension the tensioner tension spring.

4, correct the head axle to the horizontal, to ensure that the head axle and tail axle in the same vertical plane.<br>5, fixed 畚 the belt:<br>a) release the tension ingenuation spring mounted on the upper part;<br>b) connect the upper adjustment plate to the lowest 畚 the bucket belt;<br>c) Bend the 畚 the two ends into a right angle, clamp the 畚 the ends with the pressure plate, connect with the connection bolt, and subtract the excess 畚 the bucket;<br>d) After 畚 the bucket strap is connected, tighten the tensioning spring.

4. Correct the head axle shaft to the horizontal level to ensure that the head axle and the tail axle are in the same vertical plane.<br>5. Fixed dustpan belt:<br>a) Loosen the upper part of the tension spring;<br>b) Connect the upper inner adjusting plate to the lowest part to connect the dustpan belt;<br>c) Bend the two ends of the belt into a right angle, clamp the two ends of the belt with a pressing plate, connect it with the connecting bolt, and subtract the redundant belt;<br>d) After the dustpan belt is connected, tension the tensioning spring of the tensioner.