当依次发送这三天指令时（1st CMD、2nd CMD 、3rd CM

When (1st CMD, 2nd CMD, 3rd CMD) in order to send the three-day instruction, which requires three instructions if there is a delay between any two. SKH whether standard or recommended values, the number of required delay between each two commands? ? <br><br>Customers find there is no delay between the three instructions, the probability of a read-only file system will occur. After they added a 100 ms delay between each two commands, no such problems.

When these three-day instructions are sent in turn (1st CMD, 2nd CMD, 3rd CMD), there is a delay requirement between the three instructions. Does SKH have a standard or recommended value that requires a delay between each of the two commands?<br><br>The customer finds that there is no delay between the three instructions, and a probabilistic file system is read-only. They then added a 100-millisecond delay between each of the two commands without the problem.

When the three-day instructions (1st CMD, 2nd CMD, 3rd CMD) are sent in turn, whether there is a delay requirement between the two of the three instructions. Does SKH have standard or recommended value? How much delay is required between each two commands??<br>The customer found that there was no delay between the three instructions, and a probabilistic file system read-only would occur After that, they added a delay of 100 milliseconds between every two commands, without this problem.<br>