Standard equipment includes:•••Thermostatic water bathMains cord with plugGabled polycarbonate lid (excludes JB Academy, no lid supplied and SAP34,stainless steel lid supplied)••Polycarbonate base tray(s) (excludes SAP34, stainless steel base tray)Short user guideRemove packing materials carefully, and retain for future shipment or storage of theequipment.5.2 Assembly of the equipment and componentsThe water bath has three main components, the bath, the lid and the base tray. Thebase tray fits into the bath with the feet downward so that it creates a gap between thebottom of the tank and the tray.For optimum temperature stability, avoid allowing the base tray to touchthe sides of the tank when using water.The base tray must be removed when using heat transfer beadsThe lid should only be lifted by the handle, as other parts can become hot during use. Italso has a vent/thermometer hole – this hole should not be sealed as pressure couldbuild up inside the bath.5.3 InstallationPlace the water bath on a level, non-combustible surface. Ensure that the mains plugand the switch are easily accessible.5.4 Electrical supplyCheck that the supply voltage marked on the serial number label, and the type of mainsplug, are correct for your mains supply outlet, which must have a ground connection.To disconnect the equipment from the mains supply, remove the mains plug from themains supply outlet.