2、由于耳机磁铁之间相差距离较小，两侧磁铁之间有相互的吸引力，在磁铁U

2, since the phase difference between the headset magnet distance is small, there is mutual attraction between the sides of the magnets, the magnet in the UV glue is too small, the magnetic force of the magnet due to the pull itself has been, if the product falling down from a certain height, will lead directly out of the position magnet adsorption on the other side of the magnet, this phenomenon can not detect from the appearance, consumers will feel the headset into the charging case is not attractive, the headset is not charging properly and use.

2, because the difference between the headphone magnets is small, between the two magnets between each other attraction, in the case of the magnet UV amount is too small, the magnet because itself has been pulled by magnetic force, if the product falls from a certain height, it will cause the magnet directly out of position adsorbed on the other side of the magnet, this phenomenon can not be detected from the appearance, Consumers will only feel that the headset is not attractive to put into the charging box, the headset can not be properly charged and used.

2. Due to the small difference distance between the earphone magnets, there is mutual attraction between the magnets on both sides. When the amount of magnet UV glue is too small, the magnet has been pulled by the magnetic force. If the product falls from a certain height, it will lead to the magnet directly detached from the position and adsorbed on the magnet on the other side. This phenomenon cannot be detected from the appearance, and the consumer will only feel the ear There is no attraction when the phone is put into the charging box. The headset can't be charged and used normally.<br>