1·工装防护不到位2·车门安装机械手在作业过程中金属支撑部分自制防护破

1. The tooling protection is not in place. <br>2. The metal support part of the door installation manipulator is self-made to protect against damage during the operation. During the process of grasping and placing, it will rub against the corner of the door guard plate, causing wear and scratches; <br>3. Temporary use of rags for wrapping The part that is too close to the inner guard plate of the car door should be wound and fixed with tape to avoid contact and rubbing;

1. Tooling protection is not in place<br>2. During the operation of the door installation manipulator, the self-made protection of the metal support part is damaged, which will rub against the corner of the door inner guard during grasping and placement, resulting in wear and scratch;<br>3. Temporarily wrap the part too close to the door inner guard with a rag and wrap it with adhesive tape to avoid contact and scratch;<br>

1. the tooling protection is not in place. 2. During the operation, the self-made protection of the metal support part of the door installation manipulator is damaged, which will rub against the corner of the door inner guard plate during grabbing and placing, resulting in wear and scratches; 3. Temporarily wrap the part that is too close to the door inner guard with a rag, and wrap and fix it with adhesive tape to avoid contact and rubbing;