顶模的拆除必须达到早拆条件，拆除模板时需逐渐传递下来，且不可将销子和楔

The dismantling of the top mold must reach the condition of early dismantling. When removing the formwork, it must be gradually passed down, and the pins and wedges must not be removed, and then a whole aluminum plate is removed. <br>2) Before dismantling, a working platform should be erected, and at least two people should work together. <br>3) When removing the formwork, be careful not to bump or loose the support rod. <br>4) Immediately after removing the formwork, protect the corner of the door and window opening with wooden strips or angle steel to prevent artificial knocking. <br>5) The formwork should not be overstocked, and the flat mold, corner mold and side mold should not be trampled at will to prevent deformation. <br>6) The cleaning of the formwork should be timely, and the cleaning scope includes the mortar on the board surface, oil stains, the mortar of the "meshing seam" of the formwork, and the floor ash behind the formwork.

The removal of the top mold must meet the early removal conditions, the removal of the template must be gradually passed down, and can not be removed all the pins and wedges, and then remove an entire aluminum plate.<br>2) Work platform should be set up before demolition, at least two people work together.<br>3) When removing the template, be careful not to collide or loosen the support rod.<br>4) After the template is removed, immediately the door and window hole mouth yang corner area with wooden strip or corner steel protection, to prevent human-made break<br>5) Template stacking must not be too high backlog, flat mold, corner mold and side mold should not be trampled at will to prevent deformation.<br>6) The clean-up of the template should be timely, the scope of cleaning includes plate mortar, oil, template "sewing" mortar, the floor ash behind the template, each time after the removal of the template to send someone to clean up immediately

The removal of the top formwork must meet the conditions of early removal. When removing the formwork, it is necessary to gradually transfer it down, and it is not allowed to remove all the pins and wedges, and then remove a whole aluminum plate.<br>2) Before demolition, the working platform shall be erected and at least two people shall work together.<br>3) When removing the formwork, be careful not to collide or loosen the support rod.<br>4) After the formwork is removed, the external corners of the door and window openings shall be protected with wood strips or angle steel to prevent the artificial knock<br>5) The formwork shall not be piled too high, and flat formwork, corner formwork and side formwork shall not be trampled randomly to prevent deformation.<br>6) The formwork shall be cleaned in time. The cleaning scope includes mortar on the board, oil stain, mortar at the "groove joint" of the formwork and the floor ash behind the formwork. After the formwork is removed, the personnel shall be sent to clean it immediately<br>