轴承拉拔器是将内轴承从轴承座内取出的装置，是一种内装轴承拉拔器，其包括

Bearing means for drawing the bearing is removed from the bearing seat, a bearing puller built, which includes a mounting plate, the tension bolts and bolt harnesses; have not less than two of the tension bolt, each tension the bottom of the bolt are able to hook the bottom of the draw pawl bearing interior, is mounted on each of the fastening nuts of the tension bolt in the middle of the mounting plate has a width less than one long hole, a long hole is larger than the diameter of the tension bolt, the lower end of each tension bolt and extends through the elongated hole of the lower mounting plate, the fastening nut can be caught at the elongated hole mounting plate; less than two fixed nuts on the mounting plate is positioned outside of the long hole .

The bearing puller is a device that removes the inner bearing from the bearing seat and is an internal bearing puller comprising an mounting plate, a pull bolt and a wire bolt; In the middle of the mounting plate there is not less than one long hole, the width of the long hole is greater than the diameter of the pull bolt, the lower end of each pull bolt passes through the long hole and extends to the lower part of the mounting plate, the fastening nut can be stuck in the installation plate at the long hole;

The bearing puller is a device for taking out the inner bearing from the bearing seat, which is a kind of inner bearing puller, including mounting plate, tension bolt and through bolt; there are not less than two tension bolts, the bottom of each tension bolt has a claw which can catch the bottom of the inner bearing, each tension bolt is installed with a fastening nut, and the middle of the mounting plate has not less than one long hole The width of the long hole is larger than the diameter of the tension bolt. The lower end of each tension bolt passes through the long hole and extends to the lower part of the mounting plate. The fastening nut can be stuck on the mounting plate at the long hole. At least two positioning nuts are fixed on the mounting plate outside the long hole.<br>