1.研发在切换产品时未充分考虑现场装配条件是否满足产品技术要求，导致密

1. In the developed product did not sufficiently take the switching field assembly conditions are satisfied technical requirements, leading to not adhere to the sealing strip <br>2. After the hand brake tube bundles assembled state is normal, but when assembled carpeting and carpet interference, causing discount <br>3. Early A designers and suppliers point protocol change is not updated after drawing, B drawing supply tap, resulting in the problem of recurrence <br>higher fixed cover 4. the wiper bracket clip strength, can not be effectively applied force, leading to a wiper contact card does not cover the fixed firm.

1.研发在切换产品时未充分考虑现场装配条件是否满足产品技术要求，导致密封条粘不住<br>2.手制动管束装配后状态正常，但装配地毯后与地毯发生干涉，造成打折<br>3.前期设计人员与A点供应商协议更改后未更新图纸，B点按图纸供货，导致问题复发<br>4.雨刷固定盖板支架卡子强度较高，无法有效施加力，导致与雨刷固定盖板卡接不牢固。

1. The R & D did not fully consider whether the site assembly conditions meet the product technical requirements when switching products, resulting in the sealing strip not sticking<br>2. The hand brake tube bundle is in normal condition after assembly, but it interferes with the carpet after assembly, resulting in discount<br>3. The preliminary designer and the supplier of point a did not update the drawings after the agreement was changed, and point B supplied according to the drawings, resulting in the recurrence of the problem<br>4. The bracket clip of the fixed cover plate of the wiper has a high strength, which can not effectively apply force, resulting in the weak connection with the fixed cover plate of the wiper.