The brick pillars (wall stacks, window walls) of the inner frame brick house and the inner frame brick house on the ground floor are the more fragile parts of the structure, and the reinforced concrete sleeve and brick composite column can be used to strengthen the house, which can not only improve the carrying capacity of the structure, but also increase the integrity of the housing structure at the same time with the ring beam, lever or the method of adding anchor rod at the deep beam end.<br><br>When combining brick pillar reinforcement, it is important to pay attention to its construction with the brick walls on both sides need to be pulled, or can be embedded along the masonry brick horizontal seams and anchored in the fine stone concrete block.<br>(3) The reinforced concrete inside the masonry brick wall, the structure on the one hand can strengthen the brick wall, on the other hand, can be reinforced for the beam support length is not enough, wherein the cross-sectional width of the inner wall column should not be less than the width of the beam fixed with it, and each side width of at least 70mm, wherein the vertical ribs of the column and the girder of the vertical, but also can use the sand screw or flat tube bolt fixed the inner end of the column.
正在翻译中..