Concrete seal curing agent is not only a product that can improve the wear resistance of concrete, but also a product that can improve the life of the floor and make it dust-proof. Concrete sealcuring agent products use well, suitable for many occasions, therefore, in the market to get a large number of use and people's appreciation.<br><br>Concrete sealcurs improve the wear resistance and sealability and gloss of the floor, making the floor more aesthetically pleasing, wear-resistant and longer-life.<br><br>In the underground parking lot, warehouse and other areas of the ground construction concrete seal curing agent will be the ground will present a water-grinding marble-like ground gloss, which is one of its major features, but some customer feedback after the curing floor surface found that the floor gloss is not enough or no gloss, what is going on? Today Xiaogu to introduce to you how it works and the reasons for the lack of gloss.<br><br>The principle of gloss<br><br>Before the concrete seal curing agent was constructed, the ground was in an irregular uneven state, and when the light hit the ground, the light reflected in different directions, so the ground would appear very dull. After the construction of the concrete seal curing agent, the light will be reflected in the same direction, the ground will also show a luster.<br><br>Therefore, the concrete seal curing agent ground luster is not because of the addition of chemicals, but because the concrete seal curing agent to fill the ground pores, so that the flatness of the ground greatly improved, coupled with the light will make the ground appear water-grinding marble-like luster.<br><br>And the concrete seal curing agent ground put into use, the daily personnel walk friction is equivalent to polishing work, will unconsciously improve the flatness of the ground, and thus improve the gloss of the concrete seal curing agent ground. Therefore, the ground construction of concrete seal curing agent after the resulting gloss will not disappear, but will be more and more bright.<br><br>Reasons for no gloss<br><br>There are three main reasons why the cured floor is not shiny:<br><br>First, the flatness of the ground is not enough<br><br>The stronger the light reflection on the ground, the better the gloss. If the ground after the completion of the cured floor is uneven, gloss is generally not too good, which requires that the foundation surface treatment must first be smoothed, flat ground not only conducive to the uniform penetration of curing materials, but also to make the overall effect of curing floor better.<br><br>Second, the construction of uneven grinding<br><br>Grinding as the most important part of the construction, must not be sloppy, need to strictly follow the standards set by manufacturers, choose a professional floor grinder and polishing machine to perform, horizontal vertical cross-grinding, to ensure that a lot of grinding, leakage grinding<br><br>Third, the amount of curing agent material is not enough<br><br>The use of curing agent dose must meet the requirements of the process, construction units do not in order to save material costs and compress the quality of the entire project.<br>The above is the three factors that lead to the loss of luster of the solidified flooring, in the final analysis, looking for brand service providers and construction units is fundamental, essentially preventing technical, professional problems leading to poor construction acceptance results<br><br>Summarize<br><br>Well, for the cured floor gloss operating principle and the reason slack is introduced here.
正在翻译中..