为适配A30/B30平台的多款管柱，ES11电子锁的定位凸台高度较小，

为适配A30/B30平台的多款管柱，ES11电子锁的定位凸台高度较小，只有1.6mm，导致在换件时由于定位凸台高度较小，电子锁可能没有安装到正确位置，在电子锁执行上锁动作时，锁舌被卡住无法正常伸出，导致马达动作超时，由于安装位置错误，导致每次电子锁在执行上锁动作时，锁舌均无法正常伸出，导致电子锁无防盗功能，故障次数达到七次后，电子锁会产生故障码950809 DTC: Locked Position Not Reached，并禁止整车上电

In order to adapt to various pipe columns of A30 / B30 platform, the height of the positioning boss of es11 electronic lock is small, only 1.6mm. As a result, the electronic lock may not be installed in the correct position due to the small height of the positioning boss during replacement. When the electronic lock performs the locking action, the lock tongue is stuck and cannot normally extend, resulting in motor action timeout. Due to the wrong installation position, As a result, each time the electronic lock performs the locking action, the lock tongue cannot extend normally, resulting in no anti-theft function of the electronic lock. After the failure times reach seven times, the electronic lock will generate fault code 950809 DTC: locked position not reached, and the whole vehicle is prohibited from being powered on

In order to adapt to various pipe strings of A30/B30 platform, the positioning boss height of ES11 electronic lock is small, only 1.6mm, which leads to that the electronic lock may not be installed in the correct position due to the small positioning boss height when replacing parts, and the locking bolt is stuck and cannot extend normally when the electronic lock performs locking action, which leads to the motor action timeout, and the locking bolt cannot extend normally every time the electronic lock performs locking action due to the wrong installation position. As a result, the electronic lock has no anti-theft function. After the failure times reach seven times, the electronic lock will generate the fault code 950809 DTC: locked position not reached, and prohibit the whole vehicle from being powered on.