从刻蚀Pt值即在长度为9.96μm尺度范围内横截面线痕轮廓图最大高度最深深度的高度差值角度分析,KOH圆滑体系效果最为明显,经KOH圆滑体系的英语翻译

从刻蚀Pt值即在长度为9.96μm尺度范围内横截面线痕轮廓图最大高度最

从刻蚀Pt值即在长度为9.96μm尺度范围内横截面线痕轮廓图最大高度最深深度的高度差值角度分析,KOH圆滑体系效果最为明显,经KOH圆滑体系处理处理之后,Pt值幅度明显下降,样品b的Pt值下降幅度为67.1%,进行增加反应处理时间,Pt反而变大,这主要由于Pt值具有一定的随机性。但无论哪一个体系,Pt值总体下降,这表明经圆滑处理后,绒面确实变得更为均匀一致,这个也可由扫描电镜图体现。按照最大降幅比角度分析:铜铁圆滑体系最大下降幅度为7.7%,超声处理方法Pt最大降幅为17.4%,这说明KOH刻蚀效果最佳。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
From the angle difference analysis of the etching Pt value, that is, the maximum height and the deepest depth of the cross-sectional line mark profile in the length range of 9.96μm, the effect of the KOH smooth system is the most obvious. The Pt value of sample b decreased by 67.1%. When the reaction time was increased, the Pt value increased, which was mainly due to the randomness of the Pt value. But no matter which system, the Pt value decreased overall, which shows that after the smooth treatment, the suede really becomes more uniform, and this can also be reflected by the scanning electron microscope. According to the analysis of the maximum reduction ratio: the maximum reduction of copper-iron smooth system is 7.7%, and the maximum reduction of ultrasonic treatment method Pt is 17.4%, which shows that the KOH etching effect is the best.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
From the angle of height difference of the maximum height of the cross-sectional line profile in the range of 9.96 m, the effect of KOH sleek system is most obvious, after treatment by KOH sleek system, the Pt value range decreased significantly, the pt value of sample b decreased by 67.1%, the increase reaction processing time, Pt is larger, mainly because pt value has a certain randomness. But regardless of the system, the Pt value has dropped overall, indicating that the suede does become more uniform and consistent after smooth treatment, which can also be reflected in the scanning mirror. According to the angle of maximum reduction ratio: the maximum decrease of copper-iron sleek system was 7.7%, and the maximum decrease of the ultrasonic treatment method Pt was 17.4%, which shows that KOH etching is the best effect.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
The results show that KOH system has the most obvious effect. After KOH system treatment, the value of Pt decreases significantly. The value of Pt decreases 67.1% under the PT value of sample B. when the reaction time is increased, the value of Pt becomes larger. This is mainly because the value of Pt has a The randomness of the decision. However, no matter which system, the total value of Pt decreased, which showed that after the treatment of sleek, the suede really became more uniform, which can also be reflected by SEM. According to the angle analysis of the maximum drop ratio, the maximum drop of copper iron smooth system is 7.7%, and the maximum drop of ultrasonic treatment method PT is 17.4%, which shows that KOH etching effect is the best.<BR>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: