There shall be no insulation breakd

There shall be no insulation breakdown during the test. Insulation breakdown is considered to have occurred when the current that flows as a result of the application of the test voltage rapidly increases in an uncontrolled manner, that is theinsulation does not restrict the flow of the current. Corona discharge or a single momentary flashover is not regarded as insulation breakdown. Insulation coatings are tested with metal foil in contact with the insulating surface. Thisprocedure is limited to places where the insulation is likely to be weak, for example, wherethere are sharp metal edges under the insulation. If practicable, insulating linings are testedseparately. Care is taken that the metal foil is so placed that no flashover occurs at the edges of the insulation. Where adhesive metal foil is used, the adhesive shall be conductive. To avoid damage to components or insulation that are not involved in the test, disconnection of integrated circuits or the like and the use of equipotential bonding are permitted.For equipment incorporating both REINFORCED INSULATION and lower grades of insulation, careis taken that the voltage applied to the REINFORCED INSULATION does not overstress BASICINSULATION or SUPPLEMENTARY INSULATION.