PV-Glass rolling machine KWM 8s-2.9

PV-Glass rolling machine KWM 8s-2.900-330Please note that these quotations are meant for preliminary information only, and that we would highly appreciate to discuss your particular needs in person. Consider that this offer shall give you a rough idea about the various possibilities how to design your glass production. If there is any other information you need, or any other way in which we could co-operate, please do not hesitate to contact me at any time. Our full experience is at your service. Again, we thank you for your interest, and look forward to the pleasure of serving you and adding your name of our list of satisfied clients abroad.Note:For the production of thin rolled glass within small tolerances it is necessary to keep the process parameter as constant as possible. Few of these parameters are: The glass temperature before the rolling machine The low and constant viscosity of the glass The constant height of the glass level before the rolling machine The adjustable viscosity profile crosswise to the pulling direction Cooling water and blast air temperature stabilityThe reachable thickness tolerances according to the above mentioned items should be less than +/- 0.15 mm measured in the gross direction of the glass band.Attention:We are not able to influence all these above mentioned parameters. Only an interaction of