The series of cables that run from the machine base to the X1 disconnect panel include a 12 AWG. 5 conductor cable, an 18 AWG. 12 conductor cable, an ethernet cable, and three safety grounds. During disassembly, these cables will be disconnected at the X1 disconnect panel and will remain their connections with the machine base. For reconnecting these cables and their conductors, first feed these cables into the X1 disconnect panel by reestablishing their liquid tight carrier connection with the X1 disconnect panel. After this connection is reestablished, use the machine’s electrical schematic and follow the table below to reconnect these respective cables and their conductors.