1、前风窗下装饰板密封条粘接前，要求装饰板擦拭干净，不得有灰尘及颗粒存

1. Before bonding the sealing strip of the decorative plate under the front wind window, the decorative plate must be wiped clean, and there must be no dust or particles. <br>2. Before the sealing strip is bonded, a wiper should be added to the cover plate to increase the primer. Apply 30-50N force to squeeze to ensure firm bonding. <br>3. After the sealing strip is bonded, it needs to be stored at room temperature for 8-12H, and then be assembled.

1, the front wind window under the decorative plate seal ingering before, requires the decorative plate wipe clean, no dust and particles exist<br>2, seal ingesting before the requirements of wiper fixed cover to add the bottom coating, after bonding to the sealing strip to apply 30-50N force squeeze, to ensure a firm bonding.<br>3, sealing strip bonding requires 8-12H storage at room temperature, and then assembly.

1. Before bonding the sealing strip of the lower trim panel of the front windshield, the trim panel shall be wiped clean and free of dust and particles<br>2. Before bonding the sealing strip, it is required to add a primer on the fixed cover plate of the wiper. After bonding, the sealing strip shall be extruded with a force of 30-50n to ensure firm bonding.<br>3. After bonding, the sealing strip shall be stored at room temperature for 8-12h before final assembly.<br>