(1) 布置散流器布置散流器时，根据空调区的大小和室内所要求的参数，选

(1) Arrangement of diffusers When the diffusers are arranged, the number of diffusers is selected according to the size of the air-conditioning area and the parameters required indoors, and they are generally arranged in a symmetrical position or a plum blossom shape. The aspect ratio of the air supply area of ​​the round or square diffuser should not be greater than 1: 1.5. The distance between the centerline of the diffuser and the wall is generally not less than 1m. <br>(2) The pre-selected diffuser can calculate the air supply volume of a single diffuser from the total air supply volume of the air conditioning area and the number of diffusers. Assuming the wind speed of the diffuser throat, calculate the required diffuser throat area, and select the diffuser specifications according to the required diffuser throat area. <br>(3) Check the range of the jet to calculate the range according to equation (8-2). Check whether the range meets the requirements. The range of the diffuser set at the center should be 75% of the distance from the center of the diffuser to the edge of the room or area. <br>(4) Check the indoor average wind speed. Calculate the indoor average wind speed according to equation (8-3), and check whether it meets the requirements.

(1) When arranging the diffuser, according to the size of the air-conditioning area and the parameters required in the room, select the number of diffusers, generally according to the symmetrical position or plum-shaped arrangement. The aspect ratio of the circular or square diffuser air supply area should not be greater than 1:1.5. The distance between the centerline and the wall of the diffuser is generally not less than 1m.<br>(2) Preselected diffuser from the air conditioning area of the total air supply and the number of diffusers, you can calculate the air supply of a single diffuser. Assuming the wind speed of the throat of the diffuser, the desired throat area of the diffuser is calculated, and the bulker specification is selected according to the desired throat area of the diffuser.<br>(3) The range of the school nuclear jet is based on the type (8-2), and whether the range of the school core meets the requirements. The range of the diffuser set at the center should be 75% of the distance from the center of the diffuser to the room or the edge of the area.<br>(4) The average wind speed in the school core is calculated according to the type (8-3), whether the school core meets the requirements.

(1) When arranging diffusers, the number of diffusers shall be selected according to the size of the air conditioning area and the parameters required in the room. Generally, they shall be arranged symmetrically or in quincunx shape. The aspect ratio of the air supply area of circular or square diffusers should not be greater than 1:1.5. The distance between the center line of the diffuser and the wall is generally not less than 1m.<br>(2) The air volume of a single diffuser can be calculated by the total air volume and the number of diffusers in the air conditioning area. Assuming the wind speed of the diffuser throat, the required diffuser throat area is calculated, and the diffuser specification is selected according to the required diffuser throat area.<br>(3) Check the range of jet according to equation (8-2), check whether the range meets the requirements. The range of the diffuser set at the center shall be 75% of the distance from the center of the diffuser to the edge of the room or area.<br>(4) Check whether the indoor average wind speed meets the requirements by calculating the indoor average wind speed according to equation (8-3).<br>