The action process of the device is

The action process of the device is: when the position of the workpiece is put, the clamp head is pushed out by the cylinder; when the workpiece enters the clamp mouth, when the side of the plate contacts the induction block, the induction block moves backward, and the proximity switch receives the signal; The control system receives the signal from the proximity switch, the cylinder enters the oil, the upper jaw presses down, presses the plate, and the cylinder piston is locked. After clamping, the clamp moves with the workpiece driven by the gear and rack, Send to the host. Then after the host machine punches the plate, after the control system receives the command, the cylinder is relieved of pressure, the piston rod rises under the action of the cylinder spring, and the chuck returns to the initial position under the action of the return spring. At the same time, locking the cylinder and pulling the cylinder back to the original position, the whole action is over.