The motor is new type as old motor no more production anymore. We need to modify Installation is not exactly same with existing. Before we do modification, we need to make sure Motor Performance quality is acceptable. We will test Motor no-load with 3.3KV Supply, run continue for min 1 Day & check performance. After that we plan to install at location & check with Compressor loading. # Planning to check Motor No-load at 3.3KV Voltage on 13th January, 2020 Please to provide us Checklist requirement for Motor No-Load testing # If Motor No-Load Performance OK, then planning test with Compressor loading on 10th April,2020 As April,2020 we have Plant Annual Shutdown. We can do testing while mill production is stopped