液晶支架安装取液晶支架组件和上壳组件，将液晶支架液晶面朝下，将支架安装

Installation of the LCD bracket <br><br>Take the LCD bracket assembly and the upper shell assembly, turn the LCD bracket liquid crystal face down, and install the bracket to the upper area of ​​the upper shell. Note that it needs to be installed in the positioning column on the edge of the upper shell. Do not fold it to the LCD FPC during installation, and the installation is complete. Figure 2. <br>Note that the LCD tearing hand needs to be pierced out of the upper shell to avoid tearing the film after assembly or tearing the film in advance, and then paste the LCD protective film back after the installation is complete.

LCD bracket installation<br>Take the liquid crystal support assembly and the upper shell assembly, put the liquid crystal surface of the liquid crystal support downward, and install the support to the area above the upper shell. Note that it needs to be installed in the positioning column at the edge of the upper shell. Do not fold the liquid crystal FPC during installation. The installation is completed, as shown in Figure 2.<br>Note that the LCD tearing hand needs to go through the upper shell to avoid being unable to tear the film after assembly or tear the film in advance. Stick back the LCD protective film after installation.

Liquid crystal bracket installation Take the liquid crystal bracket assembly and the upper shell assembly, and install the bracket to the upper region of the upper shell with the liquid crystal side of the liquid crystal bracket facing down. Pay attention to the need to install the bracket into the edge positioning column of the upper shell, and do not fold the LCD FPC when installing. The installation is completed as shown in Figure 2. Pay attention to the fact that the liquid crystal tear hand needs to wear out the upper shell to avoid being unable to tear the film after assembly or tearing the film in advance, and then stick the liquid crystal protective film back after installation.