Plate pallet free conveyor<br>Related parameters: (1) Travel speed 0-7.5m/min, dedicated for sheet metal, with dedicated rubber modules installed on the chain conveyor to avoid damage to the sheet metal;<br>(2) Equipped with a plate turnover conveyor chain, it is convenient for different transportation methods of aerated concrete plates.<br>Automatic disc changer<br>Related parameters: Can stack more than 10 pallets at once.<br>Plate repair crane<br>Related parameters: span 7000mm, lifting 2.8T<br>Repair fixture machine beam frame<br>Including 38kg heavy rail, 400 * 300H steel, 4 crane columns, and 4 diagonal braces.<br>Plate repair lifting tool<br>Plate repair trolley<br>Subtotal<br>ten<br>Plate preparation section<br>Steel bar straightening and cutting machine<br>GT4-8 type<br>1. Overall dimensions of the host (excluding material support frame): 1700x700x1150mm.<br>2. Related parameters: (1) Round material cutting length: 250-5000mm Straightening roller speed: 2300r.p.m, straightening speed: 30m/min<br>(2) Main motor power: Y132S-4 5.5kw Cut off motor power: Y90L-4 1.5kw;<br>Circular steel bar crane<br>3t, span 7m<br>Circular steel bar crane beam frame<br>Including 38kg heavy rail, 400 * 300H steel, 6 crane columns, and 6 diagonal braces.<br>Fully automatic mesh welding machine<br>1. Related parameters: (1) Welding speed 100 times/min (transverse bar spacing of 50mm), welding width ≤ 500mm, longitudinal bar spacing ≥ 50mm (increasing), manual adjustment of transverse bar spacing error less than ± 2mm, longitudinal bar length ≥ 1000mm can weld the minimum longitudinal bar length, transverse bar spacing ≥ 20mm, computer setting of transverse bar welding spacing as non equidistant welding, minimum spacing 20mm, maximum spacing unlimited, adjacent transverse bar spacing error ± 2mm; The error between the welding points of the transverse reinforcement and the end of the longitudinal reinforcement is ± 2mm, and the spacing error between the welding points of the transverse reinforcement and the transverse reinforcement is 2mm.<br>Horizontal reinforcement length ≤ 500mm, with a range of 350-500, a diameter of 4-6 mm for longitudinal reinforcement, and a diameter of 4-6 mm for transverse reinforcement;<br>(2) The maximum welding capacity diameter is 6mm (longitudinal reinforcement)+6mm (transverse reinforcement), which can be welded in any combination within the range of weldable longitudinal and transverse reinforcement diameters. The minimum welding capacity diameter is 4mm (longitudinal reinforcement)+4mm (transverse reinforcement), which can be welded in any combination within the range of weldable longitudinal and transverse reinforcement diameters;<br>(3) The number of welded longitudinal bars ≤ 8 varies according to the needs of Party A. The longitudinal bar feeding method is disc feeding, and the transverse bar feeding method is pre cutting/automatic dropping (straightness 2mm/M). The cutting accuracy of longitudinal bars: length error ± 2mm; The deviation in the cutting length of longitudinal bars with a set length of deformation of ± 1mm at the cutting position is less than ± 2mm; The deformation of the longitudinal reinforcement cutting part is less than ± 1mm;<br>(4) The equipment has a power of 150KVA * 2, a load duration of 20%, a power supply voltage of 380V ± 10%, and a gas source pressure of 0.6-0.8MPa.
正在翻译中..