检查提升机模块是否设置，若没有，需要对模块进行设置设置方法1 长按”设

检查提升机模块是否设置，若没有，需要对模块进行设置设置方法1 长按”设置”按钮，首先显示“P”，”P”应为P-27；若非P-27，应调为P-27。2 再按一下“设置”按钮，应是"A"。"A"调成A01.2或者A01.(点)3均可3 再按一下“设置”按钮，应该是“B000”，此时完成设置，再按“设置”按钮，回到最初界面。检查配电柜上接近开关是否连接，连接好之后，开始启动。（电路具体细节参考随机自带的电路图）

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Check whether the hoist module is set. If not, you need to set the module. Method 1 Long press the "Settings" button, the first display "P", "P" should be P-27; if not P-27, it should be adjusted to P- 27. 2 Press the "Settings" button again, it should be "A". "A" can be adjusted to A01.2 or A01. (Point) 3 can be 3 Press the "Set" button again, it should be "B000", now complete the setting, and then press the "Set" button to return to the initial interface. Check whether the proximity switch on the power distribution cabinet is connected. After the connection is made, start to start. (For specific details of the circuit, please refer to the attached circuit diagram)

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Check that the lifter module is set up and, if not, need to be set up Set the method 1 Press and hold the Settings button to display "P" first, P should be P-27, or P-27 if not P-27. 2 Press the Settings button again, which should be "A". "A" is adjusted to A01.2 or A01. (Point)3 is all right 3 Press the Settings button again, which should be "B000", and then press the Settings button to return to the original interface. Check that the proximity switch on the power distribution cabinet is connected and, when connected, start starting. (The circuit details refer to the random circuit diagram)

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

Check whether the hoist module is set, if not, it is necessary to set the module Setting method 1. Press the "set" button, and "P" should be displayed first, and "P" should be P-27; if it is not P-27, it should be set to P-27. 2 press the "Settings" button again, which should be "a". "A" can be changed to a01.2 or a01. (point) 3 3 press the "Settings" button again, which should be "b000". At this time, complete the setting, then press the "Settings" button to return to the original interface. Check whether the proximity switch on the distribution cabinet is connected, and start starting after the connection is completed. (refer to the circuit diagram of random self-contained for circuit details)

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.